28/2/2011 [Audio & Visual]
Model: YRS-700/YRS-1100/YRS-2100/YSP-2200
Analysis of our quality assurance in Japan has revealed severe sound noise which appears after power on with certain manual settings in My Surround mode (YRS-1100/ YRS-2100 / YSP-2200) and Surround mode (YRS-700).
As a risk precaution, please follow these instructions to confirm your firmware version:
- 1. Press “POWER” key to turn this unit to standby mode.
- 2. While holding down “INPUT” key, press “POWER” key to turn on the power.
- 3. Release “INPUT” key when “ADVANCED SETUP” is displayed.
- 4. After “TURN ON VOLUME” is displayed, press and hold “INPUT” key until the firmware version is displayed.
- 5. Confirm whether your firmware version is in the table below.
Press "POWER" key to turn this unit to standby mode after you have confirmed your firmware version.
If your firmware version is
| Model | Firmware Version |
|---|---|
| YRS-700 | 4.02.02 or 5.02.02 |
| YRS-1100/YRS-2100 | 4.03.02 or 5.03.03 |
| YSP-2200 | 4.03.03 or 5.03.03 |
Please contact us:
Phone: 0844 811 1116
E-Mail: avsupportuk@gmx.yamaha.com
Or the dealer that you purchased it from before using the product again.
Related Products
- YSP-2200
-
This extremely convenient Digital Sound Projector™ is low profile enough to fit neatly in front of a TV and is 3D compatible (HDMI V.1.4a).
- YRS-700
-
Offering an ideal combination of styling and functionality, this TV stand includes a 7.1-channel home theatre system with 250W digital amplifier and invisible subwoofer. It has angled rear corners for space-saving corner placement.
