- Rigid Streamlined Construction— provides strict anti-vibration protection, and enables shortest cabling routes
- Large toroidal transformer, solidly mounted with independent three-dimensional inner frame
- Comprehensive low impedance design, shortened signal paths and copper-plated chassis
- Six mm thick top panel made of non-magnetic aluminium plate
- Left-right symmetrical design for independent pre amp and power amp blocks
- Floating and Balanced Power Amplifier with MOSFETs
- All-stage balanced transmission
- Direct drawing toroidal transformer for complete elimination of signal transmission loss
- Exceptionally low impedance through secure screw connections
- Superior quality electronic volume control for optimum sound
- Discretely configured phono amp
- Exquisite, large level meters reflect the dynamics in the music
- Meticulously designed and beautiful in appearance—just like a musical instrument
- Original speaker terminals for high sound quality, as well as beauty and ease of use
- Obsessive, meticulous switch design— elaborate, richly textured, easy-to-use
Rigid Streamlined Construction— provides strict anti-vibration protection, and enables shortest cabling routes
The A-S3000 has adopted a newly designed highly rigid double structure construction in order to achieve profoundly pure and accurate audio amplification. The bottom chassis and insulator ward off external vibration, and provide each circuit board a float...
- 15/8/2016 [Audio & Visual]
- EISA: The YSP-5600 has been voted the best soundbar for 2016
By providing Dolby Atmos support, 4K-capable HDMI connectivity and automated room EQ...
- 26/8/2015 [Audio & Visual]
- Designed to revolutionize the enjoyment of music in everyday life - MusicCast
The brand new Yamaha MusicCast audio systems have been designed to revolutionize the enjoyment of music in everyday life. Although each individual component is a little masterpiece of sound and design in itself, they only reveal their full multi-room potential when interacting with each other. Read more ...
- 20/8/2015 [Audio & Visual]
- Yamaha introduces MusicCast!
Multi-room audio newly defined – the revolution for hifi-sound in the whole house. Read more ...
- 20/8/2015 [Audio & Visual]
- Yamaha MusicCast in the whole house!
Stereo and AV receivers, PianoCraft micro hifi system and active hifi speakers support multi room system. Read more ...
- 22/8/2014 [Audio & Visual]
- Two Yamahas, one passion - join us in our foto contest at IFA 2014!
Come to IFA in Berlin, visit us on our booth and have a picture taken of yourself and the YZR-M1 – the same motor bike that Valentino Rossi and Jorge Lorenzo drive during races – and you'll have the chance to win a great prize! Read more ...
Rigid Streamlined Construction— provides strict anti-vibration protection, and enables shortest cabling routes
The A-S3000 has adopted a newly designed highly rigid double structure construction in order to achieve profoundly pure and accurate audio amplification. The bottom chassis and insulator ward off external vibration, and provide each circuit board a floating structure supported by an independent inner frame, thoroughly eliminating the impact of vibration. And the power source unit, which consists of a power transformer and capacitors, which are major sources of internal vibration, is fixed firmly with a three-dimensional structured inner frame, and is supported solidly by the front panel and the rear panel. The power amp circuit board and the weighty heat sink are attached to the left and right inner frames. The power supply unit and amplifier circuits are thus structurally isolated, achieving an ideal chassis structure which thoroughly blocks the transmission of vibration. Moreover, the inner frame that supports the power transformer is shaped with ample space below it, allowing passage of the wiring to each circuit over the shortest possible route. The newly developed chassis with this innovative structure helps to minimise the length of the signal paths and achieve low impedance, as well as providing high rigidity and anti-vibration benefits. The result is a dramatic reduction in signal loss, for remarkably pure audio amplification.
Large toroidal transformer, solidly mounted with independent three-dimensional inner frame
An independent three-dimensional inner frame has been employed in order to provide a more solid mount for the large toroidal transformer, which is installed in the centre of the A-S3000, considering the ideal weight balance. The completely copper-plated inner frame has a structure which integrates the front-back and left-right frames with a convex-shaped highly rigid main frame as its base, reducing vibration coming from all directions. For the base, to which the power transformer is installed on the inner frame, brass was selected by strictest examining the particular sonic properties of various materials by exhaustive listening tests. This material effectively reduces vibration caused by the power transformer, helping to create sound of greater clarity and spaciousness.
Comprehensive low impedance design, shortened signal paths and copper-plated chassis
In order to achieve the absolute purest signal transmission, capable of communicating even the most subtle nuances of the music and its powerful dynamism—for example, reproducing powerful, agile low frequencies, and portraying all the emotional nuances of the human voice—we’ve methodically pursued low impedance throughout the A-S3000. Using a double construction design creates space for cables under the bottom of the chassis, enabling the shortest cable path for the supply of power from the transformer to the power stage and for the audio signal transmission path. This helps to eliminate signal transmission loss and to smoothly supply power, even during high-volume transients, and allows more direct audio reproduction without even the slightest adverse effect on the music. Also, the three-dimensional inner frame to which the power transformer is mounted is copper plated. Extremely low impedance is assured by lowering the ground potential. This sharply lowers the impact of noise, and delivers a profound and richly emotional sound—one that perfectly communicates all the original expression of the artist.
Six mm thick top panel made of non-magnetic aluminium plate
The top panel and the front panel are made of aluminium, a non-magnetic material, in order to eliminate any adverse effect on the audio signals. In the course of strictest examination of the sound quality, the front panel thickness was set at 7mm and the top panel was set at 6mm. This helps to realise an exceptionally natural, spacious sound by providing a highly rigid chassis structure, and at the same time, skillfully controlling the impact of vibration. Moreover, heat dissipation openings on the top panel were formed by high precision cutting from both sides—front and back—of the panel, and finished with thorough scrupulous attention to every detail. Stylish slits in the centre, matching the companion CD-S3000 and its design, strongly emphasise the powerful power source unit inside by having the same width as the power transformer.
Insulators allow use of spikes or pads
The insulators are crucial parts that block outside vibrations. They adopt Yamaha’ s original metal legs in order to maximise vibration control performance. The user can select point installation by applying the supplied spikes or plane insulation with the supplied pads, and use these combined with an interlocking rack if desired.
Left-right symmetrical design for independent pre amp and power amp blocks
The amplifier circuit design features independent pre amp and power amp blocks, and perfect left-right symmetry. Separation of the pre amp, which handles low energy signals, from the power amp, which handles high-energy amplified signals, greatly reduces sound deterioration caused by mutual interference. Moreover, the left-right symmetrical design, which keeps the left and right power stages completely separate, ensures greater channel separation and enhances clarity of the stereo image.
Floating and Balanced Power Amplifier with MOSFETs
The basic design of the power amp circuit adopts Yamaha’s proprietary Floating and Balanced Power Amplifier technology. Adopting output elements with the same polarity on the plus and minus sides of the output stage, and also completely separating the NFB (Negative Feedback) circuit and power supply into a total of four plus and minus sides of the left and right channels, results in thoroughly symmetric push-pull operation of the output stage, Completely floating the entire power amp circuit from the ground removes any negative impact of minute voltage fluctuations or ground noise. Moreover, the output elements are comprised of MOSFETs, which provide a warm and natural sonic character. The use of MOSFETs, which have the same polarity on the plus and minus sides, further evolves the ideal of a complete symmetrical design, to eliminate sound quality variations due to difference in polarity—a major distinguishing characteristic of the Floating and Balanced Power Amplifier—resulting in sound with a superior signal-to-noise ratio and a superbly well-defined sound field.
All-stage balanced transmission
The A-S3000 features fully balanced signal transmission. Moreover, the control system circuits (volume, tone, etc.) of the pre amp feature totally balanced operation, realising ideal balance in all stages.
Direct drawing toroidal transformer for complete elimination of signal transmission loss
The cabling of the power transformer adopts an ingenious method in order to significantly reduce impedance. The winding of the transformer itself is directly connected to the terminal with a screw, unlike with conventional cabling. This enables a power supply which thoroughly limits connection loss and energy loss caused by soldering. The toroidal transformer was selected with top priority on sound quality, contributing superior strength, as well as a profoundly natural and spacious sound.
Exceptionally low impedance through secure screw connections
In order to completely eliminate signal energy loss, important parts of even the circuits employ screw connections. In addition to wiring of the block capacitor of the power unit—which is the real heart of the amplifier and as such requires high power—screw connections were adopted for all crucial spots of signal transmission, including the connection of the pre amp circuit with the power amp circuit, and the cabling to the speaker terminals from the output stage of the power amp. In addition to making the signal path as short as possible, this significantly lowers the impedance, and greatly reduces signal loss.
Superior quality electronic volume control for optimum sound
We’ve utilised a high quality digital volume control specially designed by New Japan Radio Co., Ltd., which consists only of ladder-type resistance, removing the impact of slew-rate decline or colouring of the sound, delivering higher purity in the sound, and excellent, fast response to large volume changes and steep transients.
Discretely configured phono amp
The phono amp is comprised of an MC head amp and an equaliser amp, each of which are discretely configured, resulting in a rich sound with pronounced musicality, when playing vinyl records with both MC and MM phone cartridges.
Exquisite, large level meters reflect the dynamics in the music
The A-S3000 features large level meters on the front panel, giving a direct visual sense of the dynamics and pulse of the music. These beautiful meters are softly illuminated by LED, lending a warm, lamplight look. The meter indicators can, in addition to the VU display, be switched to peak display, and can be selected according to the user’s preference. Moreover, the glass window of the meters is diagonally cut and precision-fit to the back surface of the front panel, leaving no gaps and using no screws for connection—lending an exceptionally elegant appearance to the unit.
Meticulously designed and beautiful in appearance—just like a musical instrument
As befits a top-end audio component, the A-S3000 gives off the presence of a fine musical instrument, with absolutely no screws or fasteners that can be seen from the outside. Every single aspect of its construction and design exudes master craftsmanship and reflects an obsession with quality—a truly musical quality possible only for Yamaha, a world class musical instrument manufacturer. The amplifier with its refined design has been meticulously finished by the skillful use of advanced processing technologies: integrating the top panel and side wood connection, leaving no gaps while using different materials—metal and wood—for the connection.
Original speaker terminals for high sound quality, as well as beauty and ease of use
The speaker terminals are the final link in the audio chain of this amplifier, and have also been designed with meticulous obsession. They are screw-type terminals with large handles featuring an original design, and have been crafted by cutting pure brass to enable a secure connection with no reduction in sound quality. Moreover, the shape conforms nicely to the human fingers—not only creating an elegant visual impression, but also allowing users to turn them easily and to firmly tighten them with minimal force.
Obsessive, meticulous switch design— elaborate, richly textured, easy-to-use
Since the controls—the volume dial, switches, and so on—are the parts of the amplifier which users actually touch and feel directly, their surface texture and design were created with the strictest attention to detail. Individual controls such as the volume or input switching dials, emanate a richly elegant feel thanks to the use of cut aluminium knobs. Switches, including the power switch, were made with obsessive attention to texture in every detail; they were shaped with refined craftsmanship so that when they are raised or lowered, the gap between the switch and panel surface is impossible to see.
Remote control with simple design and superior texture
The supplied remote control features a design complementary to the aluminium panel of the amplifier itself, with a simple, easy-to-understand button layout and gorgeous metallic texture. In addition to the basic volume adjustment and input switching controls of the A-S3000, it can also be used for operation of the companion CD-S3000.
Audio & Video
A-S3000, CD-S3000 / Yamaha @ IFA 2013
|AUDIOVISUAL (AV ONLINE)||UNIT 5 THE SIDINGS NEWLINE IND ESTATE BACUP LANCASHIRE OL13 9RW||01706 878444|
|DD AV LTD||130 LONDON ROAD DERBY DE1 2SR||01332 346284|
|FRANK HARVEY||163 SPON STREET COVENTRY WEST MIDLANDS CV1 3BB||02476 222622|
|HIFI SOUND||CASTLEGATE MILL QUAYSIDE STOCKTON-ON-TEES TS18 1BZ||01642 267012|
|Home Sound||246 CAUSEWAYSIDE EDINBURGH MIDLOTHIAN EH9 1UU||0131 2299350|
|IDEAL AV||YORK VILLAS NORMANTON WEST YORKSHIRE WF6 1HA||01924 781011|
|EDDYS||116-118 ALFRETON ROAD NOTTINGHAM NG7 3NR||01159 248300|
|PETER TYSON||6 ABBEY STREET CARLISLE CA3 8TX||01228 546756|
|WALL OF SOUND||STOCKS HILL MARKET WEIGHTON ROAD HOLME ON SPALDING MOOR YORK YO43 4EE||01430 861271|
|A N AUDIO||34 HUNTINGDON STREET ST NEOTS PE19 1BB||01480 472071|
|ASC-ATLANTIC||970 NORTH CIRCULAR ROAD LONDON NW2 7JR||0208 4527774|
|AUDIBLE FIDELITY LTD||UNITS 7-8 BADBY PARK HEARTLANDS BUSINESS PARK DAVENTRY NORTHAMPTONSHIRE NN11 8YT||01327 301006|
|AV FANATICS||56 GREENFIELDS EARITH HUNTINGDON CAMBRIDGESHIRE PE28 3QH||01223 967568|
|H D AUDIOVISUAL||ORTONS 17 OLD CROSS HERTFORD HERTS SG14 1RE||01992 538230|
|MUSICAL IMAGES||173 STATION ROAD EDGWARE MIDDLESEX HA8 7JX||0208 9525535|
|NINTRONICS||7 MARTINS FIELD BUSINESS PARK WELWYN GARDEN CITY HERTFORDSHIRE AL7 1HG||01923 237717|
|KJ WEST ONE||26 NEW CAVENDISH STREET LONDON W1G 8TY||0207 48682620|
|AUDIO T LTD||19 OLD HIGH STREET OXFORD OX3 9HS||01865 765961|
|AUDIO VENUE||36 QUEEN STREET MAIDENHEAD BERKSHIRE SL6 1HZ||01628 633995|
|INFIDELITY||9 HIGH STREET HAMPTON WICK KINGSTON UPON THAMES KT1 4DA||0208 9433530|
|THE MULTI-ROOM||UNIT 5 EASTSIDE IND.EST. MEAD ROAD CHELTENHAM GLOUCESTERSHIRE GL53 7EF||01242 511133|
|PHASE 3 (WORTHING)||215 TARRING ROAD WORTHING SUSSEX BN11 4HW||01903 245577|
|SEVENOAKS SOUND||UNIT 1 MOREWOOD CLOSE INDUSTRIAL ESTATE SEVENOAKS KENT TN13 2HU||01732 775 632|
|UNILET SOUND||35 HIGH STREET NEW MALDEN KT3 4BY||0208 9429567|
Receiver / Integrated Amplifier
|Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe)||170 W + 170 W|
|High Dynamic Power/Channel (8/6/4/2 ohms)||120/150/200/300 W|
|Frequency Response||5 Hz-100 kHz (+0 dB/-3 dB)|
|RIAA Equalization Deviation||20 Hz-20 kHz +/-0.5 dB|
|Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz)||0.025%|
|Signal-to-Noise Ratio (CD)||103 dB (S: 200 mV)|
|Input Sensitivity (CD)||200mV/47k ohms|
|Dimensions (W x H x D)||435 x 180 x 464 mm; 17-1/8” x 7-1/8” x 18-1/4”|
|Weight||24.6 kg; 54.2 lbs.|