Thank you for using Yamaha products.
AW4416 MIDI Remote Template for the 03D
How to install
This scene memory data is stored in a MIDI file as bulk system exclusive message data. Uncompress the downloaded MIDI file and load it into a MIDI sequencer. Then play back the file from the MIDI sequencer to send the data to the AW4416. See Version 2.0 Supplement manual for details on receiving bulk data transfers. Some MIDI sequencers may not be able to handle system exclusive messages or may limit the size of these messages. If you have trouble sending the data to the AW4416's scene memory, check the specifications of your MIDI sequencer to see if it is capable of handling system exclusive messages.
Overview
Using this template allows remote control over the 03D mixer's input/output levels and ON/OFF status for channels 1-24, Stereo In, Effect Returns 1&2, and the Stereo Out.
Main features
This template makes it possible to remotely control the 03D's input/output levels and ON/OFF status for channels 1-24, Stereo In, Effect Returns 1&2, and the Stereo Out. The control data can be recorded into the AW4416 for automated control over these parameters.
Features in detail
The faders of remote banks A, B control the input/output levels of the 03D's channels 1-24, Stereo In, Effect Returns 1 & 2, and Stereo Out. The ON/OFF switch of remote banks A, B, C, and D (D can be assigned to channels 1-3 and 8 only) are assigned to the 03D's channels 1-24, Stereo In, Effect Returns 1 & 2, and Stereo Out.
Caution: If you would like to set the 03D control change assign parameters to their default settings, press the MIDI key on the 03D to call up the Asgn page and select INITIALIZE. Then select 03D DEFAULT.
How to use
Using a MIDI cable, connect the AW4416's MIDI OUT/THRU jack to the 03D's MIDI IN jack. Press the 03D's Utility key to call up the MIDI/HOST page. In the General Setup section, set the RX Port to MIDI.
Press the 03D's MIDI key to call up the MIDI Setup page and set Control Change RX to ON. Set the MIDI channel of the 03D to the same MIDI channel as the AW4416.
Press MIDI key and select "MIDI"from MIDI/HOST/OPTION in the MIDI Set up 2 screen.
Note: You should limit the MIDI equipment connected to the AW4416's MIDI OUT/THRU jack to only one 03D. MIDI remote control makes extensive use of channel messages, so it is possible that it may inadvertently control other connected equipment.
Please visit the AW4416 website for information related to the AW4416.
http://www.AW4416.com
(C) 2002 YAMAHA CORPORATION
All Rights Reserved