TF Editor V3.00 for Mac OS X 10.11-10.9 (Previous version)

Important Notice

[Notice: Checking the version number]
You may check the TF main firmware version number from the version field in the About screen of the SYSTEM SETUP screen.

TF Series Firmware/Editor Compatibility

Please make sure to use appropriate version of Editor software which is compatible with your console firmware in reference to the following compatibility chart. Using an unsupported Firmware/Editor and other related software combination may result in unexpected behavior.

Compatibility List

*1) Please use MonitorMix V1.0.2 when you useTF Firmware V1.12.or later.
If you use previous MonitorMix V1.0.1 with TF Firmware V1.12, some troubles may occur. (For example, MonitorMix is forced to stop.)
*2) TF Firmware V1.11 includes only efficiency improvement of product inspection. So it does not include new function or some improvements.
TF Editor V2.00 or older are not support Mac OS X 10.11.x.

Main Revisions and Enhancements

V2.50 to V3.00

Additional Function

  • Now supports the TF-RACK.
  • Ensured that the STEREO/SUB Level Link function maintains offsets.
    [NOTICE]
    Offset values will also be saved in a Scene. However, Scenes saved via the TF series V2.50 or earlier do not include Offset values. This means that Offset values will not change even if such Scenes are recalled.
  • Added bus sends from the AUX9/10 – AUX19/20 busses to the SUB bus.
  • Added a SEND FROM screen to the FX1/FX2 channels.
  • Added the Matrix1-4 meters in the TOOLBAR.
  • New Presets have been added to the default Presets of the Channel Library. To add them to the Library list, execute “Initialize All Memory” after updating to V3.0.

Specification changes

  • Added the threshold link function of the “Multi Band Comp” effect to keep offsets between the Low, Mid, and High parameters. In addition, the Make Up parameter has been removed to avoid a sudden change of volume.
  • Changed the Input Gain offset link action between stereo link channels to keep the offset value even if the Input Gain is set to maximum or minimum.
  • The SYSTEM SETUP screen and the USER SETUP screen have been consolidated to the SETUP screen.
  • Connection to a TF series unit now requires the Administrator password.
  • Changed the specification to not load the settings of channel selection, fader bank selection, and SENDS ON FADER in the TF setting file (.TFF).
  • The available file type in the browser window displays when executing Load/Save/Save As menu has been unified to the .TFF file.

Improvements

  • The separator in the Manage Library/Scene screen allows you to change sizes of left and right panes. In addition, the layout has been changed.

Fixed bugs

  • Solved a problem in which operating a category of the MATRIX channel Library in the Manage Library/Scene screen caused a forced termination of the TF Editor.
  • Solved a problem in which the Send Pan parameter set to center when executing the “All Nominal” context menu in the SEND FROM screen.
  • Solved some minor bugs.

Known issue

  • When updating the TF Editor from V2.50 or earlier to V3.00, the network interface selection will be initialized. Select a network interface to connect the TF Editor and the TF series unit via “Setup” -> “Network Interface” menu as necessary.

System Requirements

OSMac OS X 10.9.x/10.10.x/ 10.11.x
CPUIntel Core family processor
Memory2GB or more
HDD100 MB or more
Display1280 x 768 or higher resolution, 16-bit or higher color depth
OtherPointing devaice(mouse, trackpad, etc), Ethernet connection (1000BASE-T/100BASE-TX)

*V2.00 or older are not support Mac OS X 10.11.x.

License Agreement and Download File